OPPO HA-1

10,499.00

Categories: ,

Description

Designs and specifications are subject to change without notice. General Dimensions (W x H x D) 10.0 x 3.1 x 13.1 inches, 254 x 80 x 333 mm Mass 13.0 lbs, 5.9 kg Power Supply AC 110-120 V~ / 220-240 V~, 50/60 Hz auto-sensing Power Consumption 70 W (operation), 0.5 W (standby) Trigger Input 3.5 V – 15 V, 10mA minimum Trigger Output 12 V, 100 mA maximum Operating Temperature 41 °F - 95 °F, 5 °C - 35 °C Operating Humidity 15% - 75% No condensation Recommended Headphone Impedance 32 ohm – 600 ohm Balanced Headphone Jack Output (XLR-4) Pin order 1: L+, 2: L-, 3: R+, 4: R-, Shell: GND 6.35 mm Headphone Jack Output Pin order Tip: L, Ring: R, Sleeve: GND XLR Balanced Audio Input Input Impedance 15k ohm Maximum Input Level 18 Vrms, +27.3 dBu (0 dBu = 0.775 Vrms) RCA Stereo Audio Input Input Impedance 10k ohm Maximum Input Level 9 Vrms, +21.3 dBu (0 dBu = 0.775 Vrms) Coaxial, Optical, AES/EBU Digital Inputs Input Format Stereo PCM Sampling Frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Word Length 16-bit, 24-bit USB DAC Audio Input (USB B Type) Input Format Stereo PCM, Stereo DSD (DoP v1.1 or native) PCM Sampling Frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz PCM Word Length 16-bit, 24-bit, 32-bit DSD Sampling Frequencies 2.8224 MHz (DSD64), 5.6448 MHz (DSD128), 11.2896 MHz (DSD256, native mode only) Profile USB 2.0, USB Audio 2.0 Mobile USB Audio Input (USB A Type) Input Format Stereo PCM PCM Sampling Frequencies 44.1 kHz, 48 kHz Profile USB 2.0, USB Audio 2.0 VBUS Power Output +5 V, 2.1 A Bluetooth Audio Input Standard Bluetooth 2.1+EDR Profile iAP, SPP, AVRCP, A2DP Audio Transmission Format SBC, aptX DAC Performance Specifications Specification XLR Output RCA Output Output Level 4.6 ± 0.3 Vrms 2.3 ± 0.3 Vrms Frequency Response (Tested with -10 dBFS / 384 kHz) 10 Hz – 170 kHz (+0/-3 dB) 20 Hz – 20 kHz (+0/-0.07 dB) 10 Hz – 170 kHz (+0/-3 dB) 20 Hz – 20 kHz (+0/-0.07 dB) THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz) < 0.00056% (< -105 dB) < 0.00056% (< -105 dB) Channel Separation > 105 dB > 105 dB Signal-to-Noise Ratio (A Weight, 20 Hz – 20 kHz) > 115 dB > 113 dB Dynamic Range (1 kHz -60 dBFS, A Weight, 20 Hz – 20 kHz) > 115 dB > 113 dB (Test condition: USB DAC input in Home Theater Bypass mode and the volume knob at Max position.) Pre-amplifier Performance Specifications Specification XLR Input – XLR Output RCA Input – RCA Output Rated Output Level 4.6 Vrms 2.3 Vrms Frequency Response 10 Hz – 200 kHz (+0/-2 dB) 20 Hz – 20 kHz (+0/-0.04 dB) 10 Hz – 200 kHz (+0/-2 dB) 20 Hz – 20 kHz (+0/-0.04 dB) THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz) < 0.00056% (< -105 dB) < 0.00071% (< -103 dB) Channel Separation > 120 dB > 110 dB Signal-to-Noise Ratio (A Weight, 20 Hz – 20 kHz) > 110 dB > 105 dB Dynamic Range (1 kHz -60 dB, A Weight, 20 Hz – 20 kHz) > 120 dB > 115 dB Maximum Gain (100 mVrms input) 6 dB 6 dB (Test condition: Volume knob at Max position and an input signal to drive the output to the rated output level.) Headphone Amplifier Performance Specifications Specification Condition XLR Input - Balanced Output RCA Input - 6.35 mm Output Maximum Output Power (Per Channel) Into 600 Ohm 2400 mW 600 mW Into 32 Ohm 3000 mW 3500 mW Rated Output Power (Per Channel) Into 600 Ohm 800 mW 200 mW Into 32 Ohm 2000 mW 500 mW Frequency Response 10 Hz – 200 kHz (+0/-1 dB) 20 Hz – 20 kHz (+0/-0.04 dB) 10 Hz – 200 kHz (+0/-1 dB) 20 Hz – 20 kHz (+0/-0.04 dB) THD+N at 1k Hz (A Weight, 20 Hz – 20 kHz) Rated Power < 0.0018% (< -95 dB) < 0.0056% (< -85 dB) 50 mW < 0.001% (< -100 dB) < 0.0022% (< -93dB) Channel Separation > 120 dB > 90 dB Signal-to-Noise Ratio (A Weight, 20 Hz – 20 kHz) > 111 dB > 111 dB Dynamic Range (1 kHz -60 dB, A Weight, 20 Hz – 20 kHz) > 120 dB > 115 dB Output Impedance 0.5 Ohm 0.7 Ohm (Test condition: Volume knob at Max position and an input signal to drive the output with 600 Ohm loads to the rated output power, unless otherwise noted.) "Made for iPod", "Made for iPhone", and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod® , iPhone®, or iPad®, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPad, iPhone, iPod and iPod touch® are trademarks of Apple Inc., registered in the U.S. and other countries. Compatible iPod/iPhone/iPad Models - USB works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, iPod touch (5th generation). - Bluetooth technology works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, and iPod touch (5th generation). All trademarks are the property of their respective owners.